UA : В роботі 57 сторінок, 16 таблиць та 25 рисунків, було використано 36 літературних джерел. Об’єктом дослідження є магнітометричні процеси, що відбуваються в сталі 08Х18Н10Т до і після холодної пластичної деформації крутінням. Мета роботи- визначити кількість α′-мартенситу деформації в сталі 08Х18Н10Т магнітометричним методом після холодної пластичної деформації крутінням. Метод дослідження – магнітометричний. Досліджено закономірності процесу мартенситно-деформаційного перетворення в аустенітних хромонікелевих сталях. Розраховано кількісне співвідношення структурних складових зразків сталі 08Х18Н10Т до та після пластичної деформації крутінням. Показано, що під час холодної пластичної деформації крутінням мартенсит розподіляється нерівномірно і досягає максимального значення в точці розриву. Одержані результати можуть бути використані для прогнозування механічних властивостей, оскільки існує кореляційний зв'язок між кількістю мартенситу і механічними властивостями.
EN : In the work 57 pages, 16 tables and 25 figures, was used 36 literary sources. The object of the study is the magnetometric processes occurring in steel 08X18H10T before and after cold torsion deformation. The aim of the study is: to determine the amount of α'-martensite deformation in steel 08X18H10T by magnetometric method after cold torsion deformation. Research methods are the analytical and magnetometrical. The regularities of the process of martensitic deformation transformation in austenitic chromium-nickel steels were investigated. The quantitative ratio of structural constituent samples of Steel 08Х18Н10Т before and after plastic torsional deformation was calculated. It is shown that after cold plastic deformation by torsion, martensite is distributed unevenly and reaches a maximum value at the point of fracture. The results obtained can be used to predict mechanical properties, since there is a correlation between the amount of martensite and mechanical properties.