UA : Головна мета – розробка режиму прокатки штаб 1,8х1200 мм зі сталі S235JR шляхом оптимізації режиму деформації чистової групи клітей стану гарячої прокатки 1680 ПАТ «Запоріжсталь». При виконанні реконструкції згідно розрахункового проєкту: зменшення товщини прокату з 2 до 1,8 мм для тонких штаб; підвищення швидкості прокатки з 8,5 до 10 м/с; обсяг виробництва після модернізації підвищується на 16%.
EN : The main goal is the development of a rolling mode for the 1.8x1200 mm S235JR steel rod by optimizing the deformation mode of the finishing group of cages of the hot rolling mill 1680 of PJSC «Zaporizhstal». When performing the reconstruction according to the estimated project: reducing the thickness of rolled steel from 2 to 1.8 mm for thin staffs; increasing the rolling speed from 8.5 to 10 m/s; the volume of production after modernization increases by 16%.